The following procedure is a guide to
T1 Telco accelerator card
PCI x16 installation. Consult your computer
documentation for additional information.
Note: This procedure is for use with UL Listed Servers or
ITE.
- Ensure that the host power supply is disconnected.
- If you are working with an enclosed computer, open your computer by removing the casing.
- If necessary, remove the adjacent PCIe slot cover corresponding to the PCIe slot in which you are installing the card.
- Plug the T1 card into the
bifurcated PCIe x16 slot on the
motherboard.Note: There is no auxiliary power connector on the T1 card.Note: There is also a USB JTAG connector that can be connected from the server to the T1 card. It can be used to program the flash. This is for development purposes and is not intended for use in a production setting.