T1 Skeleton Design on the ZU19 Zynq UltraScale+ MPSoC - 1.0 English

T1 Telco Accelerator Card Installation Guide (UG1518)

Document ID
Release Date
1.0 English

The design on the ZU19 Zynq UltraScale+ MPSoC has Linux running on the PS Cortex®-A53 processors and has connections from the PCIe Gen3 x8 from the host to the different parts of the ZU19. These connections are accomplished through AXI interconnect. These connections are as follows:

  • Processing system and its DDR
  • PL DDR through a MIG DDR controller
  • 100G MAC
  • Two 25G MAC connections

The block diagram below shows the connections.

Figure 1. ZU19 Skeleton Design Connections