Build the Network Driver Binary RPM

Alveo X3522 Installation Guide (UG1522)

Document ID
UG1522
Release Date
2022-10-18
Revision
1.0 English

To build the network driver binary RPM for the currently running kernel version:

  1. Locate the Alveo X3522 Net Driver Source [RPM package] that you downloaded. See Download the Auxiliary Bus Driver Source RPM.
  2. Build the binary RPM from the source RPM file:
    # rpmbuild --rebuild <source_rpm_path>

    where < source_rpm_path > is the full path to the source RPM.

  3. The build procedure generates a lot of console output. Towards the end of the build a "Wrote:" line identifies the location of the built binary RPM. For example:
    Wrote: <path>/kernel-module-xilinx_efct-<os_version>-<module_version>.rpm