Card Bring-Up and Validation

Alveo X3522 Installation Guide (UG1522)

Document ID
UG1522
Release Date
2022-10-18
Revision
1.0 English

After installing the card and its software, the card installation can be verified using the following commands, which are explained in more detail below.

  • lspci

    The lspci Linux command is used to validate the card as seen by the OS, as was done when installing the card.

  • ethtool

    The ethtool Linux command is used to confirm that a link is up and the correct network driver is in use.

  • ping

    The ping Linux command is used to confirm that network traffic is passing.