Flashing the Images to ZU48 Zynq UltraScale+ RFSoC QSPI Using flash_app

T2 Telco Accelerator Card Installation Guide (UG1527)

Document ID
UG1527
Release Date
2022-06-15
Revision
1.0 English
  1. Ensure that the PCIe PFs for ZU48 Zynq UltraScale+ RFSoC are visible in the lspci command.
  2. Execute ./rfsoc_flash_qspi.sh <RFSOC BOOT.BIN absolute file path> [<QSPI flash offset> [<PCIe BDF>]] inside the flash_app directory.
  3. Wait until the message “Programmed boot image” appears.