[Figure 1, callout 24]
The ZCU670 board power switch is SW15. Sliding the switch actuator from the off to on position applies 12V power from J50, a 6-pin mini-fit connector. Green LED (DS19) illuminates when the ZCU670 board power is on. See Board Power System for details on the onboard power system.
CAUTION:
Do NOT plug a PC ATX
power supply 6-pin connector into the ZCU670 board power connector J50. The ATX 6-pin
connector has a different pinout than J50. Connecting an ATX 6-pin connector into J50
damages the ZCU670 board and voids the board warranty.
The following figure shows the power connector J50, power switch SW2, and LED indicator DS19.
Figure 1. ZCU670 Power Input
