Important: The
following options are only applied if C_DEBUG_ENABLED is on. The MicroBlaze
processor takes a noticeable frequency hit as the numbers are increased.
- Number of PC Breakpoints
- Specifies the number of program counter (PC) hardware breakpoints Xilinx System Debugger (XSDB) can set.
- Number of Write Address Watchpoints
- Specifies the number of write address watchpoints XSDB can set.
- Number of Read Address Watchpoints
- Specifies the number of read address watchpoints XSDB can set.
Recommended: For
Number of PC Breakpoints and Number of Read Address
Watchpoints
, it is recommended that these two options
be set to 0 if you are not using watchpoints for debugging.