Manually Creating and Connecting to I/O Ports - 2023.2 English

You can manually create external I/O ports in the Vivado IP integrator by connecting signals or interfaces to external I/O ports and selecting a pin, a bus, or an interface connection.

To manually create/connect to an I/O port, right-click the port in the block diagram, and select one of the following from the right-click menu.

Make External

Use the Ctrl+Click keyboard combination to select multiple pins and invoke the Make External connection. This command ties a pin on an IP to an I/O port on the block design.

Create Port

Creates non-interface signals, such as a clock, reset, or uart_txd. The Create Port option gives more control to specify the input and output, the bit-width, and the type (clk, reset, or data). In case of a clock, you can also specify the input frequency.

Create Interface Port

Creates ports on the interface for groupings of signals that share a common function. For example, the S_AXI is an interface port on several AMD IP. The command provides more control to specify the interface type and the mode (master or slave).