The following steps describe how to create an XDC based Vivado RTL project. Prior to creating a Vivado RTL project, download the U45N XDC file from the U45N Product Page. The XDC is a reference for the static pinout of the card.
Because the U45N FPGA is not visible in the Vivado part selection window, a Vivado project can only be created using a Tcl command. Use the following steps to create a project:
- Launch Vivado tools.
- In the Tcl console, run the following command:
create_project <project> <path> -part <part number>
<project>is the name of the project you want to create
<path>is the path where you want to create the project
<part number>is the Vivado part number as defined in the following table.
Table 1. Vivado Part Number Alveo Card Alveo Part Vivado Part Number A-U45N XCU26 XCU26-VSVA1365-2LV-E
- Add the card XDC file to the project by clicking on Next. Select Add Files. Navigate to the location of the XDC file and click OK. . Click