OBUFDS_DPHY

UltraScale Architecture SelectIO Resources User Guide (UG571)

Document ID
UG571
Release Date
2022-08-31
Revision
1.14 English

The differential output buffer primitive (OBUFDS_DPHY) is only supported in the HP I/O banks in the Virtex UltraScale+, Kintex UltraScale+, and Zynq UltraScale+ devices (This Figure). This UltraScale architecture specific primitive is for MIPI D-PHY transmitter implementation. The HSTX_T port is used to 3-state the MIPI D-PHY high-speed (HS) transmitter. The LPTX_T port is used to 3-state the low-power (LP) transmitter. The HSTX_I and LPTX_I(_P/_N) inputs are from the interconnect logic to the HS and LP transmitters, respectively. The primitive only has support for MIPI_DPHY_DCI as the value for the IOSTANDARD attribute.

Figure 1-45:      Differential Output Buffer Primitive (OBUFDS_DPHY)

X-Ref Target - Figure 1-45

X16105-diff-output-buffer-primitive-obufds_dphy.jpg