Modports - 2023.2 English

Vivado Design Suite User Guide: Synthesis (UG901)

Document ID
UG901
Release Date
2023-11-01
Version
2023.2 English

In the previous example, the signals inside the interface are no longer expressed as inputs or outputs. Before the interface was added, the port sel was an output for bottom1 and an input for bottom2.

After the interface is added, that is no longer clear. In fact, the Vivado synthesis engine does not issue a warning that these are now considered bidirectional ports, and in the netlist generated with hierarchy, these are defined as inouts. This is not an issue with the generated logic, but it can be confusing.

To specify the direction, use the modport keyword, as shown in the following code snippet:

interface my_int;
logic sel;
logic [9:0] data1, data2, result;
modport b1 (input result, output sel, data1, data2); 
modport b2 (input sel, data1, data2, output result);
endinterface : my_int

In the bottom modules, use when declared:

module bottom1 ( 
my_int.b1 int1,

This correctly associates the inputs and outputs.