AUTOPIPELINE_LIMIT - 2023.2 English

Vivado Design Suite Properties Reference Guide (UG912)

Document ID
UG912
Release Date
2023-11-01
Version
2023.2 English
The AUTOPIPELINE_LIMIT property specifies the maximum limitation for the pipeline stages to be inserted by the optimization techniques.

Architecture Support

UltraScale, UltraScale+, Versal Adaptive SoC.

Applicable Objects

  • Nets (get_nets)
  • Cells (get_cells)

Each single net should be directly driven by a flip-flop, and the fanout load can only be 1.

Value

<N>: This is an integer number with a limit of 24.

Syntax

VHDL Example Syntax
attribute autopipeline_limit : integer; 
signal mywire: std_logic_vector(2 downto 1);
attribute autopipeline_limit of mywire: signal is "12";
Verilog Example Syntax
(* autopipeline_limit="12"*)	wire mywire;
XDC Example Syntax
set_property AUTOPIPELINE_LIMIT 12 [get_nets mywire]

Affected Steps

  • Place Design
  • Phys Opt Design