The Post CRC Frequency property (POST_CRC_FREQ) controls the frequency with which the configuration CRC check is performed for the current design. This feature is only supported in 7 series FPGAs. For more information refer to the 7 Series FPGAs Configuration User Guide (UG470).
This property is only applicable when POST_CRC is set to ENABLE. Enabling the POST_CRC property controls the periodic comparison of a pre-computed CRC value in the bitstream with an internal CRC value computed by readback of the configuration memory cells.
The POST_CRC_FREQ defines the frequency in MHz of the readback function, with a default value of 1 MHz.
- Architecture Support
- 7 series
- Applicable Objects
- Design (
current_design): The current implemented design.
- Specify the frequency in MHz as an integer with one of the following
- 1, 2, 3, 6, 13, 25, and 50
- Default = 1 MHz
- Verilog Syntax
- VHDL Syntax
- XDC Syntax
set_property POST_CRC_FREQ <VALUE> [current_design]
<VALUE>is one of the accepted values for the POST_CRC_FREQ property.
XDC Syntax Example
set_property POST_CRC_FREQ 50 [current_design]
- Write Bitstream