Machine learning (ML) strategies allow you to quickly obtain an optimized strategy for your design. If you are running multiple implementation strategies to generate implementation results, you can use ML strategies instead to help you predict which strategies are most likely to generate a good result.
You can generate strategy suggestion objects on a routed design by running the
report_qor_suggestions command. Prior to running
this command, you must run the implementation flow as follows:
- In Project Mode, use the Default or PerformanceExplore strategy.
- In Non-Project Mode, use the following Tcl commands:
opt_design: Set the
route_design: Set the
Explore. The option must match across all three Tcl commands.
After generating ML strategy suggestions, you must write the suggestions using
<directory>. This writes one RQS file per strategy. To activate
strategy objects, an RQS file with the strategy suggestion must be read using
read_qor_suggestions prior to running
opt_design, and the directives for all commands must be set
to RQS (for example,
opt_design -directive RQS).
AMD recommends the following when using ML strategies:
- For best results, resolve all methodology checks, and make sure the
design has a QoR assessment score of three or higher. To verify, run
- To further enhance maximum clock frequency, combine ML strategy suggestions
with other QoR suggestions in the same RQS file.Note: ML strategy suggestions are combined automatically when QoR suggestions are written. To disable this feature, use
write_qor_suggestions -of_objects [get_qor_suggestions ...], and filter only the desired suggestions.