CAPTUREE2 - 2023.2 English

Vivado Design Suite 7 Series FPGA and Zynq 7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2023-10-18
Version
2023.2 English

Primitive: Register Capture

Introduction

This element provides user control and synchronization over when and how the capture register (flip-flop and latch) information task is requested. The readback function is provided through dedicated configuration port instructions. However, without this element, the readback data is synchronized to the configuration clock. Only register (flip-flop and latch) states can be captured. Although LUT RAM, SRL, and block RAM states are readback, they cannot be captured. An asserted high CAP signal indicates that the registers in the device are to be captured at the next Low-to-High clock transition. By default, data is captured after every trigger when transition on CLK while CAP is asserted. To limit the readback operation to a single data capture, add the ONESHOT=TRUE attribute to this element.

Port Descriptions

Port Direction Width Function
CAP Input 1 Capture Input
CLK Input 1 Clock Input

Design Entry Method

Instantiation Recommended
Inference No
IP Catalog No
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
ONESHOT STRING "TRUE", "FALSE" "TRUE" Specifies the procedure for performing single readback per CAP trigger.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- CAPTUREE2: Register Capture
--            7 Series
-- Xilinx HDL Language Template, version 2023.2

CAPTUREE2_inst : CAPTUREE2
generic map (
   ONESHOT => "TRUE"  -- Specifies the procedure for performing single readback per CAP trigger.
)
port map (
   CAP => CAP, -- 1-bit input: Capture Input
   CLK => CLK  -- 1-bit input: Clock Input
);

-- End of CAPTUREE2_inst instantiation

Verilog Instantiation Template


// CAPTUREE2: Register Capture
//            7 Series
// Xilinx HDL Language Template, version 2023.2

CAPTUREE2 #(
   .ONESHOT("TRUE")  // Specifies the procedure for performing single readback per CAP trigger.
)
CAPTUREE2_inst (
   .CAP(CAP), // 1-bit input: Capture Input
   .CLK(CLK)  // 1-bit input: Clock Input
);

// End of CAPTUREE2_inst instantiation

Related Information

  • 7 Series FPGAs Configuration User Guide (UG470)