FDCE - 2023.2 English

Vivado Design Suite 7 Series FPGA and Zynq 7000 SoC Libraries Guide (UG953)

Document ID
UG953
Release Date
2023-10-18
Version
2023.2 English

Primitive: D Flip-Flop with Clock Enable and Asynchronous Clear

Introduction

This design element is a single D-type flip-flop with clock enable and asynchronous clear.

  • When clock enable (CE) is High and asynchronous clear (CLR) is Low, the data on the data input (D) of this design element is transferred to the corresponding data output (Q) during the Low-to-High clock (C) transition.
  • When CLR is High, it overrides all other inputs and resets the data output (Q) Low.
  • When CE is Low, clock transitions are ignored.

This flip-flop is asynchronously cleared, outputs Low, when power is applied. Power-on conditions are simulated when global set/reset (GSR) is active. GSR defaults to active-High but can be inverted by adding an inverter in front of the GSR input of the STARTUP_E2 symbol.

Logic Table

Inputs Outputs
CLR CE D C Q
1 X X X 0
0 0 X X No Change
0 1 D D

Design Entry Method

Instantiation Yes
Inference Recommended
IP Catalog No
Macro support No

Available Attributes

Attribute Type Allowed Values Default Description
INIT BINARY 1, 0 0 Sets the initial value of Q output after configuration.

VHDL Instantiation Template

Unless they already exist, copy the following two statements and paste them before the entity declaration.
Library UNISIM;
use UNISIM.vcomponents.all;

-- FDCE: Single Data Rate D Flip-Flop with Asynchronous Clear and
--       Clock Enable (posedge clk).
--       7 Series
-- Xilinx HDL Language Template, version 2023.2

FDCE_inst : FDCE
generic map (
   INIT => '0') -- Initial value of register ('0' or '1')
port map (
   Q => Q,      -- Data output
   C => C,      -- Clock input
   CE => CE,    -- Clock enable input
   CLR => CLR,  -- Asynchronous clear input
   D => D       -- Data input
);

-- End of FDCE_inst instantiation

Verilog Instantiation Template


// FDCE: Single Data Rate D Flip-Flop with Asynchronous Clear and
//       Clock Enable (posedge clk).
//       7 Series
// Xilinx HDL Language Template, version 2023.2

FDCE #(
   .INIT(1'b0) // Initial value of register (1'b0 or 1'b1)
) FDCE_inst (
   .Q(Q),      // 1-bit Data output
   .C(C),      // 1-bit Clock input
   .CE(CE),    // 1-bit Clock enable input
   .CLR(CLR),  // 1-bit Asynchronous clear input
   .D(D)       // 1-bit Data input
);

// End of FDCE_inst instantiation

Related Information

  • 7 Series FPGAs Configurable Logic Block User Guide (UG474)