Making Connections with Start Connection Mode - 2023.2 English

Vivado Design Suite User Guide: Designing IP Subsystems Using IP Integrator (UG994)

Document ID
UG994
Release Date
2023-10-18
Version
2023.2 English

You can quickly make connections by clicking on a pin of an IP or module and, when the pencil icon is displayed, dragging the cursor to another pin and releasing the mouse as shown in the following figure.

Figure 1. Starting Connection Mode to Make Connections

After the connection is made to the s_axi_aclk pin of the AXI BRAM Controller, the Start Connection mode will offer to connect the signal to the s_axi_aclk pin of AXI IIC, or any other adjacent compatible pins. In this way connections from a source pin can quickly be made to multiple different load pins.