Hardware and Software Requirements

Key Revocation Lab (XAPP1344)

Document ID
XAPP1344
Release Date
2022-03-14
Revision
v1.1 English
The following hardware and software are required for this application note:
Note: This lab was developed on Windows 10. If using Linux the file paths will need to be updated with your system's path details.
  • ZCU102 evaluation board
  • AC to DC power adapter (12 VDC)
  • USB type-A to micro-B USB cable for UART communication
  • Secure Digital (SD) card ≤ 32 GB
  • SD formatted using the FAT file system
  • Vitis Unified Software Platform (2021.1 or later)
    Note: Versions other than 2021.1 have not been verified.
  • Serial communications terminal application (i.e., Tera Term or PuTTY)
  • Required design files, which can be downloaded from Reference Design
Important: Programming any of the noted eFUSE settings preclude Xilinx test access, therefore, Xilinx might not accept return material authorization (RMA) requests. Additionally, programming eFUSEs limits the usage of the board, because after provisioning the board for secure boot, only authenticated boot images can boot.
Note: For the simplicity of this application note, you are advised to extract the contents of the required design files to C:\Xilinx.