Hardware and Software Requirements

Isolation Design Flow + Dynamic Function eXchange Example Application Note (XAPP1361)

Document ID
Release Date
1.1 English

The following hardware and software are required for this application note:

  • Xilinx ZCU102 Evaluation Board (revision 1.0 or later, with production silicon)
  • AC to DC power adapter (12 VDC)
  • USB Type-A to Micro-B USB cable for UART communication
  • Secure Digital (SD-MMC) card ≤ 32 GB
  • Vivado® 2021.1 or later
    Note: This application note is verified against 2021.1, 2021.2, and 2022.1 versions.
  • Integrating LogiCORE SEM IP. Refer to Integrating LogiCORE SEM IP in Zynq UltraScale+ Devices (XAPP1298) and the associated reference design files.
  • Xilinx Vitis™ Unifies Software Development Platform 2021.1 or later
    Note: Future versions of Vitis have not been verified with this application note.
  • Serial communication terminal application (Tera Term or PuTTY)
  • Required associated reference design files that can be downloaded from the AMD-Xilinx website.