RX Pause Interface Control/Status/Statistics Signals - 2.6 English

1G/10G/25G Switching Ethernet Subsystem Product Guide (PG292)

Document ID
PG292
Release Date
2021-02-05
Version
2.6 English

Ports in this section are available when Enable RX Flow Control Logic is selected from the MAC Options tab and Select Core is Ethernet MAC+PCS/PMA 64-bit.

Table 1. RX Pause Interface Control / Status / Statistics Signals
Name Size I/O Description
ctl_rx_forward_control_* 1 I A value of 1 indicates that the CORE forwards control packets to you. A value of 0 causes CORE to drop control packets. 1
ctl_rx_pause_ack_* 9 I Pause acknowledge signal. This bus is used to acknowledge the receipt of the pause frame from the user logic.
ctl_rx_check_ack_* 1 I Wait for acknowledge. If this input is set to 1, the CORE uses the ctl_rx_pause_ack[8:0] bus for pause processing. If this input is set to 0, ctl_rx_pause_ack[8:0] is not used. 1
ctl_rx_pause_enable_* 9 I RX pause enable signal. This input is used to enable the processing of the pause quanta for the corresponding priority. 1 1
ctl_rx_enable_gcp_* 1 I A value of 1 enables global control packet processing. 1
ctl_rx_check_mcast_gcp_* 1 I A value of 1 enables global control multicast destination address processing. 1
ctl_rx_check_ucast_gcp_* 1 I A value of 1 enables global control unicast destination address processing. 1
ctl_rx_pause_da_ucast_* 48 I Unicast destination address for pause processing. 1
ctl_rx_check_sa_gcp_* 1 I A value of 1 enables global control source address processing. 1
ctl_rx_pause_sa_* 48 I Source address for pause processing. 1
ctl_rx_check_etype_gcp_* 1 I A value of 1 enables global control ethertype processing. 1
ctl_rx_etype_gcp_* 16 I Ethertype field for global control processing. 1
ctl_rx_check_opcode_gcp_* 1 I A value of 1 enables global control opcode processing. 1
ctl_rx_opcode_min_gcp_* 16 I Minimum global control opcode value. 1
ctl_rx_opcode_max_gcp_* 16 I Maximum global control opcode value. 1
ctl_rx_enable_pcp_* 1 I A value of 1 enables priority control packet processing. 1
ctl_rx_check_mcast_pcp_* 1 I A value of 1 enables priority control multicast destination address processing. 1
ctl_rx_check_ucast_pcp_* 1 I A value of 1 enables priority control unicast destination address processing. 1
ctl_rx_pause_da_mcast_* 48 I Multicast destination address for pause processing. 1
ctl_rx_check_sa_pcp_* 1 I A value of 1 enables priority control source address processing. 1
ctl_rx_check_etype_pcp_* 1 I A value of 1 enables priority control ethertype processing. 1
ctl_rx_etype_pcp_* 16 I Ethertype field for priority control processing. 1
ctl_rx_check_opcode_pcp_* 1 I A value of 1 enables priority control opcode processing. 1
ctl_rx_opcode_min_pcp_* 16 I Minimum priority control opcode value. 1
ctl_rx_opcode_max_pcp_* 16 I Maximum priority control opcode value. 1
ctl_rx_enable_gpp_* 1 I A value of 1 enables global pause packet processing. 1
ctl_rx_check_mcast_gpp_* 1 I A value of 1 enables global pause multicast destination address processing. 1
ctl_rx_check_ucast_gpp_* 1 I A value of 1 enables global pause unicast destination address processing. 1
ctl_rx_check_sa_gpp_* 1 I A value of 1 enables global pause source address processing. 1
ctl_rx_check_etype_gpp_* 1 I A value of 1 enables global pause ethertype processing. 1
ctl_rx_etype_gpp_* 16 I Ethertype field for global pause processing. 1
ctl_rx_check_opcode_gpp_* 1 I A value of 1 enables global pause opcode processing. 1
ctl_rx_opcode_gpp_* 16 I Global pause opcode value. 1
ctl_rx_enable_ppp_* 1 I A value of 1 enables priority pause packet processing. 1
ctl_rx_check_mcast_ppp_* 1 I A value of 1 enables priority pause multicast destination address processing. 1
ctl_rx_check_ucast_ppp_* 1 I A value of 1 enables priority pause unicast destination address processing. 1
ctl_rx_check_sa_ppp_* 1 I A value of 1 enables priority pause source address processing. 1
ctl_rx_check_etype_ppp_* 1 I A value of 1 enables priority pause ethertype processing. 1
ctl_rx_etype_ppp_* 16 I Ethertype field for priority pause processing. 1
ctl_rx_check_opcode_ppp_* 1 I A value of 1 enables priority pause opcode processing. 1
ctl_rx_opcode_ppp_* 16 I Priority pause opcode value. 1
stat_rx_unicast_* 2 1 O Increment for good unicast packets.
stat_rx_multicast_* 2 1 O Increment for good multicast packets.
stat_rx_broadcast_* 2 1 O Increment for good broadcast packets.
stat_rx_vlan_* 2 1 O Increment for good 802.1Q tagged VLAN packets.
stat_rx_pause_* 1 O Increment for 802.3x Ethernet MAC Pause packet with good FCS.
stat_rx_user_pause_* 1 O Increment for priority-based pause packets with good FCS.
stat_rx_inrangeerr_* 2 1 O Increment for packets with Length field error but with good FCS.
stat_rx_pause_valid_* 9 O This bus indicates that a pause packet was received and the associated quanta on the stat_rx_pause_quanta[8:0][15:0] bus is valid and must be used for pause processing. If an 802.3x Ethernet MAC Pause packet is received, bit[8] is set to 1.
stat_rx_pause_quanta0_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta1_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta2_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta3_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta4_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta5_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta6_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta7_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_quanta8_* 16 O These buses indicate the quanta received for each of the eight priorities in priority-based pause operation and global pause operation. If an 802.3x Ethernet MAC Pause packet is received, the quanta are placed in value [8].
stat_rx_pause_req_* 9 O Pause request signal. When the RX receives a valid pause frame, it sets the corresponding bit of this bus to a 1 and keep it at 1 until the pause packet has been processed.
  1. This port is available when Include AXI4-Lite is not selected in the Configuration tab.
  2. This port is available when RX flow control is enabled or Preemption is enabled or core type is MAC+PCS/PMA 32-bit.