Status Register Map for 1G/10G/25G Ethernet Subsystem - 2.6 English

1G/10G/25G Switching Ethernet Subsystem Product Guide (PG292)

Document ID
PG292
Release Date
2021-02-05
Version
2.6 English

The status registers provide an indication of the health of the system. These registers are Read-Only and a read operation clears the register.

Status registers are cleared according to the following conditions:

  • Applying s_axi_aresetn clears both TX and RX status registers
  • When a particular status register is read (clear on read)
  • Applying rx_reset clears the RX status registers only
  • Applying tx_reset clears the TX status registers only
Table 1. Status Register Map
Hex Address Register Name Notes
0x0180 STAT_CORE_SPEED_REG  
0x0400 1 STAT_TX_STATUS_REG1: 0400  
0x0404 STAT_RX_STATUS_REG1: 0404  
0x0408 1 STAT_STATUS_REG1: 0408 Only in MAC+PCS and PCS-only variants
0x040C 1 STAT_RX_BLOCK_LOCK_REG: 040C Only in MAC+PCS and PCS-only variants
0x043C 1 STAT_RX_RSFEC_STATUS_REG: 043C Only for MAC+PCS/PMA 64-bit variant
0x0448 1 STAT_RX_FEC_STATUS_REG: 0448 Only in MAC+PCS and PCS-only variants
0x044C 1 STAT_TX_RSFEC_STATUS_REG: 044C Only for MAC+PCS/PMA 64-bit variant
0x0450 1 STAT_TX_FLOW_CONTROL_REG1: 0450 Only in MAC+PCS variant and MAC-only variants
0x0454 1 STAT_RX_FLOW_CONTROL_REG1: 0454 Only in MAC+PCS variant and MAC-only variants
0x0458 1 STAT_AN_STATUS: 0458 Only in MAC+PCS and PCS-only variants
0x045C 1 STAT_AN_ABILITY: 045C Only in MAC+PCS and PCS-only variants
0x0460 1 STAT_AN_LINK_CTL: 0460 Only in MAC+PCS and PCS-only variants
0x0464 1 STAT_LT_STATUS_REG1: 0464 Only in MAC+PCS and PCS-only variants
0x0468 1 STAT_LT_STATUS_REG2: 0468 Only in MAC+PCS and PCS-only variants
0x046C 1 STAT_LT_STATUS_REG3: 046C Only in MAC+PCS and PCS-only variants
0x0470 1 STAT_LT_STATUS_REG4: 0470 Only in MAC+PCS and PCS-only variants
0x0474 1 STAT_LT_COEFFICIENT0_REG: 0474 Only in MAC+PCS and PCS-only variants
0x0494 1 STAT_RX_VALID_CTRL_CODE: 0494 Only in MAC+PCS and PCS-only variants
0x04A0 1 STAT_GT_WIZ_REG  
0x049C 1 STAT_TSN_REG: 0x049C Only when 802.1cm Preemption feature enabled
  1. Refer to 10G/25G High Speed Ethernet Subsystem Product Guide (PG210)