Connections - 2021.1 English

Vivado Design Suite User Guide System-Level Design Entry (UG895)

Document ID
UG895
Release Date
2021-06-16
Version
2021.1 English

The <connections> section defines the connections between different components. The <connection> tag identifies two components associated with a connection. The <connection_map> tag describes the bus connection between the two components. The details of a <connection> are used by the Vivado Design Suite to look up corresponding constraints in the part0_pins.xml file when one of the components is the FPGA type <component>.

<connections>
  <connection name="part0_dip" component1="part0" component2="dip_switches">
    <connection_map name="part0_dip_1" typical_delay="5" c1_st_index="0"
    c1_end_index="3" c2_st_index="0" c2_end_index="3"/>
  </connection>
</connections>

A <connection> can have the following attributes:

Table 1. <connection> Attributes
Tag Usage/Description Example (KC705)
name= Name given to the connection. part0_dip
component1= The first component in the connection. part0
component2= The second component in the connection. dip_switches

The <connection_map> has the following attributes:

Table 2. <connection_map> Attributes
Tag Usage/Description Example (KC705)
typical_delay= The delay on the connection between components. 5
c1_st_index=

This is the <pin> index of the starting pin in the connection for component1.

If component1 is an FPGA, this index is taken from the part0_pins.xml file.

0
c1_end_index= This is the <pin> index of the final pin in the connection for component1. 3
c2_st_index= This is the <pin> index of the starting pin for component2. 0
c2_end_index= This is the <pin> index of the final pin in the connection for component2. 3