| OPTIMIZER_DATA_PARALLEL_NOT_ALLOWED_ERROR |
torch.nn.DataParallel module is not allowed. |
| OPTIMIZER_INVALID_ANA_RESULT_ERROR |
Model analysis result is not valid. This is usually caused by PyTorch or Python version changes. |
| OPTIMIZER_INVALID_ARGUMENT_ERROR |
Invalid argument. |
| OPTIMIZER_TORCH_MODULE_ERROR |
The operation is not an instance of torch.nn.Module. |
| OPTIMIZER_NOT_EXCLUDE_NODE_ERROR |
Some nodes must be excluded from pruning. |
| OPTIMIZER_NO_ANA_RESULT_ERROR |
Model analysis results not found. |
| OPTIMIZER_SUBNET_ERROR |
Subnet candidates not found. Must do subnet searching first. |
| OPTIMIZER_UNSUPPORTED_OP_ERROR |
The operation is not supported yet. |
| OPTIMIZER_KERAS_MODEL_ERROR |
The given object is not an instance of keras.Model. |
| OPTIMIZER_KERAS_LAYER_ERROR |
The operation is not an instance of keras.Layer. |
| OPTIMIZER_DATA_FORMAT_ERROR |
The data format for saving weights is not allowed in pruning. |
| OPTIMIZER_INVALID_GRAPH |
The parsed graph is invalid. |
| OPTIMIZER_IO_ERROR |
IO error. Usually occurs during disk read/write. |
| OPTIMIZER_MODEL_ANALYSIS_ERROR |
An error occurred while performing model analysis. |
| OPTIMIZER_PARSE_GRAPH_FAILED |
Unable to parse the model to a computation graph. |
| OPTIMIZER_WEIGHTS_NOT_FOUND |
The weights for the operation can not be found. |
| QUANTIZER_TF1_INVALID_BITWIDTH |
invalid parameter |
| QUANTIZER_TF1_INVALID_METHOD |
invalid parameter |
| QUANTIZER_TF1_INVALID_TARGET_DTYPE |
invalid parameter |
| QUANTIZER_TF1_MISSING_QUANTIZE_INFO |
not found |
| QUANTIZER_TF1_INVALID_INPUT |
not found |
| QUANTIZER_TF1_UNSUPPORTED_OP |
Unsupported Op type |
| QUANTIZER_TF1_LENGTH_MISMATCH |
invalid parameter |
| QUANTIZER_TF1_INVALID_INPUT_FN |
fail to import |
| QUANTIZER_TF2_UNSUPPORTED_MODEL |
Unsupported model type |
| QUANTIZER_TF2_UNSUPPORTED_LAYER |
Unsupported layer type |
| QUANTIZER_TF2_INVALID_CALIB_DATASET |
Invalid calibration dataset |
| QUANTIZER_TF2_INVALID_INPUT_SHAPE |
Invalid input shape |
| QUANTIZER_TF2_INVALID_TARGET |
Invalid Target |
| QUANTIZER_TORCH_BIAS_CORRECTION |
Bias correction file in quantization result directory does not match current model. |
| QUANTIZER_TORCH_CALIB_RESULT_MISMATCH |
Node name mismatch is found when loading quantization steps of tensors. Please ensure the vai_q_pytorch version and PyTorch version for test mode are the same as those in calibration (or QAT training) mode. |
| QUANTIZER_TORCH_EXPORT_ONNX |
The quantized module, which is based PyTorch traced model, can not be exported to ONNX due to PyTorch internal failure. The PyTorch internal failure reason is listed in message text. May needs adjust the float model code. |
| QUANTIZER_TORCH_EXPORT_XMODEL |
Fail to convert the graph to XMODEL. Needs to check the reasons in the message text. |
| QUANTIZER_TORCH_FAST_FINETINE |
Fast fine-tuned parameter file does not exist. Call load_ft_paramthe in the model code to load them. |
| QUANTIZER_TORCH_FIX_INPUT_TYPE |
Data type or value is illegal in arguments of quantization OP when exporting the ONNX model. |
| QUANTIZER_TORCH_ILLEGAL_BITWIDTH |
The configuration of tensor quantization is illegal. It should be an integer and in the range given in message text. |
| QUANTIZER_TORCH_IMPORT_KERNEL |
Importing vai_q_pytorch library file error. Check PyTorch version matching vai_q_pytorch version (pytorch_nndct.__version__) or not. |
| QUANTIZER_TORCH_NO_CALIB_RESULT |
Quantization result file does not exist. Check whether the calibration is done or not. |
| QUANTIZER_TORCH_NO_CALIBRATION |
Quantization calibration is not performed completely, check if module FORWARD function is called! FORWARD function of torch_quantizer.quant_model needs to be called in the user code explicitly. Please refer to the example code at https://github.com/Xilinx/Vitis-AI/blob/master/src/Vitis-AI-Quantizer/vai_q_pytorch/example/resnet18_quant.py. |
| QUANTIZER_TORCH_NO_FORWARD |
torch_quantizer.quant_model FORWARD function must be called before exporting quantization result. Please refer to example code at https://github.com/Xilinx/Vitis-AI/blob/master/src/Vitis-AI-Quantizer/vai_q_pytorch/example/resnet18_quant.py. |
| QUANTIZER_TORCH_OP_REGIST |
The type of OP can't be registered multiple times. |
| QUANTIZER_TORCH_PYTORCH_TRACE |
Failed to get PyTorch traced graph from model and input arguments. The PyTorch internal failure reason is reported in message text. May needs adjust float model code. |
| QUANTIZER_TORCH_QUANT_CONFIG |
Quantization configuration items are illegal. Refer to the message text. |
| QUANTIZER_TORCH_SHAPE_MISMATCH |
Tensors shape are mismatched. Refer to the message text. |
| QUANTIZER_TORCH_VERSION |
PyTorch version is not supported for the function or does not match vai_q_pytorch version (pytorch_nndct.__version__). Refer to the message text. |
| QUANTIZER_TORCH_XMODEL_BATCHSIZE |
Batch size must be 1 when exporting XMODEL. |
| QUANTIZER_TORCH_INSPECTOR_OUTPUT_FORMAT |
Inspector only supports dump SVG or PNG format. |
| QUANTIZER_TORCH_INSPECTOR_INPUT_FORMAT |
Inspector no longer supports the fingerprint. Please provide architecture name instead. |
| QUANTIZER_TORCH_UNSUPPORTED_OPS |
The quantization of the op is not supported. |
| QUANTIZER_TORCH_TRACED_NOT_SUPPORT |
The model produced by 'torch.jit.script' is not supported in vai_q_pytorch. |
| QUANTIZER_TORCH_NO_SCRIPT_MODEL |
vai_q_pytorch does not find any script model. |
| QUANTIZER_TORCH_REUSED_MODULE |
The quantized module has been called multiple times in forward pass. If you want to share quantized parameters in multiple calls, call trainable_model with "allow_reused_module=True" |
| QUANTIZER_TORCH_DATA_PARALLEL_NOT_ALLOWED |
torch.nn.DataParallel object is not allowed. |
| QUANTIZER_TORCH_INPUT_NOT_QUANTIZED |
Input is not quantized. Please use QuantStub/DeQuantStub to define quantization scope. |
| QUANTIZER_TORCH_NOT_A_MODULE |
Quantized operation must be instance of "torch.nn.Module". Replace the function by a "torch.nn.Module" object. Original source range is indicated in the message text. |
| QUANTIZER_TORCH_QAT_PROCESS_ERROR |
Must call "trainable_model" first before getting deployable model. |
| QUANTIZER_TORCH_QAT_DEPLOYABLE_MODEL_ERROR |
The given trained model has BN fused to CONV and cannot be converted to a deployable model. Make sure model.fuse_conv_bn() is not called. |
| QUANTIZER_TORCH_XMODEL_DEVICE |
XMODEL can only be exported in CPU mode, use deployable_model(src_dir, used_for_xmodel=True) to get a CPU model. |
| WEGO_TORCH_UNKNOWN_ERROR |
Unknown error |
| WEGO_TORCH_INTERNAL_ERROR |
Internal error |
| WEGO_TORCH_INVALID_ARGUMENT |
Invalid argument error |
| WEGO_TORCH_INVALID_MODEL |
Invalid model error |
| WEGO_TORCH_OUT_OF_RANGE |
Out of range error |
| WEGO_TORCH_UNIMPLEMENTED |
Unimplemented error |
| WEGO_TORCH_RUNTIME_ERROR |
Runtime error |
| XCOM_OP_CONV_PARAM_ERROR |
Convolution parameter out of range or error, including feature map height, width, depth, channel, dilation size, transposition size, kernel height, kernel width, stride height, stride width or padding left, right, top, bottom, depth or fixed-point shift range or other network designed parameters. |
| XCOM_OP_IO_TENSOR_TYPE_ERROR |
Error tensor type for IO operator such as load and save. |
| XCOM_OP_MEM_TYPE_ERROR |
The op's output tensor's memory type is error. |
| XCOM_OP_PAD_SMF_MISSING |
Failed to generate padding in pool since smf data missing. |
| XCOM_OP_POOL_SIZE_ERROR |
Failed to calculate pooling size with formula. |
| XCOM_OP_SIGMOID_HEIGHT_NE |
sigmoid operator need input and output have same height. |
| XCOM_OP_SIGMOID_WIDTH_NE |
sigmoid operator need input and output have same width. |
| XCOM_OP_SIGMOID_CHANNEL_NE |
sigmoid operator need input and output have same channel. |
| XCOM_OP_REORG_HEIGHT_NE |
reorg operator need input height and output height have scale multiple. |
| XCOM_OP_REORG_WIDTH_NE |
reorg operator need input width and output width have scale multiple. |
| XCOM_OP_REORG_CHANNEL_NE |
reorg operator need input channel and output channel have scale multiple. |
| XCOM_OP_REORG_CHANNEL_OVERFLOW |
feature channel size overflows regorg channel input. |
| XCOM_OP_TYPE_UNMATCH |
unmatch operator type, it could be unknown operator or inappropriate suffix operator type. |
| XCOM_OP_TYPE_ERROR |
op involved type error, unrecognized op involved type here. |
| XCOM_TILING_SIZE_ERROR |
Tiling bank group size not enough and tiling failed. Perhaps input tensor or kernel size is too large or tiling bank aligned has calculation fault. |
| XCOM_DPUOP_DATA_SIZE_ERROR |
Size not enough or unaligned while mapping smf onto banks with channel, width, depth, height, stride_h and other dimension incompatible. Please check bank info |
| XCOM_ACGEN_POOL_KERNEL_OUTRANGE |
Pooling layer kernel size out of range. check network design or input data size. |
| XCOM_OP_NONLINEAR_TYPE_ERROR |
Error of operator non-linear type. |
| XCOM_ACGEN_UNSUPPORT_QUANTIZATION |
Unsupport quantization bit shift while assembly code generation. |
| XCOM_ACGEN_NONLINEAR_TYPE_ERROR |
Unrecognized or unmatched type of non-linear type while assembly code generation |
| XCOM_ACGEN_BANK_IO_ERROR |
Bank input or output addr count error while assembly code generation, it may exceed hardware capapcity. |
| XCOM_ACGEN_PRELU_ERROR |
parameter-relu data info error while convolution assembly code generating, might be error with parameter data input width or number error. |
| XCOM_ACGEN_CONV_WEIGHTS_OC_NE |
Convolution output channel number should be equal to convolution weights input, if not, check data life-circle. |
| XCOM_ACGEN_BANK_OC_WEIGHTS_UNALIGNED |
Weights bank address need be aligned to convolution output channel. |
| XCOM_BANK_UNALIGNED_ADDRESSING |
Trying to address in the middle of bank addr which is illegal, bank addressing only support aligned operation, for example, stride or address mod 16 == 0. |
| XCOM_ACGEN_CONV_FAKE_WEIGHTS_BANKID |
Convolution weights input bank id need be equal to base bank id, check bank assignation of weights. |
| XCOM_ACGEN_CONV_FAKE_BIAS_BANKID |
Convolution bias input bank id need be equal to base bank id, check bank assignation of bias. |
| XCOM_ACGEN_CONV_OCG_WEIGHTS_CNT_NE |
Convolution weights input number need be equal to output channel group size, check weights input number. |
| XCOM_ACGEN_KERNEL_ALL_PAD |
kernel are fulfilled with pad value, this is an unexpected situation, check kernel size and dilation value. |
| XCOM_ACGEN_BANK_ADDR_IN_OUTRANGE |
Bank address input number need be ordered in hardware limitation. |
| XCOM_ACGEN_BANK_ADDR_OUT_OUTRANGE |
Bank address output number need be ordered in hardware limitation. |
| XCOM_ACGEN_ELEW_IO_ERROR |
Element wise operator have more than hardware capability input number, or, input and output number is not equal. check bank assignation. |
| XCOM_ACGEN_ELEW_IO_CHANNEL_NE |
Element wise operator need input and output have same channel group size. |
| XCOM_ACGEN_ELEW_IO_LENGTH_NE |
Element wise operator need input and output have same length. |
| XCOM_ACGEN_MUL_IO_ERROR |
mul operator have more than hardware capability input number, or, input and output number is not equal. check bank assignation. |
| XCOM_ACGEN_INPUT_MISSING |
Operator assembly code generation input bank address missing, check bank assignation. |
| XCOM_ACGEN_BLOB_MISSING |
Blob shifting failed because cannot find specific blob id in blob area. check blob assignation. |
| XCOM_ACGEN_OUTPUT_MISSING |
Operator assembly code generation ouptut bank address missing, check bank assignation. |
| XCOM_ACGEN_IO_TUPLE_NE |
Some operator need input and output number be equal but here is not. check bank assignation. |
| XCOM_ACGEN_WEIGHTS_NOT_UNIQ |
Some operator need uniq weights input bank, check bank assignation. |
| XCOM_ACGEN_PRELU_NOT_UNIQ |
Some operator need uniq prelu input bank, check bank assignation. |
| XCOM_ACGEN_PARAM_NOT_UNIQ |
Some operator need uniq param input bank like sigmoid, check bank aggregation. |
| XCOM_ACGEN_BIAS_NOT_UNIQ |
Some operator need uniq bias input bank, check bank assignation. |
| XCOM_ACGEN_V3ME_BANK_MISSING |
Operator's dest bank have no virtual bank or constant bank, on v3me conv operator at least need 1 type of bank. |
| XCOM_ACGEN_IC_WEIGHTS_CHANNEL_NE |
Depth operator input channel and weights channel are not equal, check bank assignation or network structure. |
| XCOM_ACGEN_BIAS_WEIGHTS_CHANNEL_NE |
Depth operator weighs channel and bias channel are not equal, check bank assignation. |
| XCOM_ACGEN_INVALIDE_STATUS |
Compiler internal error, some status is invalid for assembly code generation like object was not inited, missing input or output data on dpu bank. check data flow and code logic. |
| XCOM_ACGEN_BANK_JUMP_READ_ERROR |
The bank cannot jump read. |
| XCOM_ACGEN_BANK_JUMP_WRITE_ERROR |
The bank cannot jump write. |
| XCOM_OP_ARGMAX_IO_HEIGHT_NE |
argmax need input and output have equal height. |
| XCOM_OP_ARGMAX_IO_WIDTH_NE |
argmax need input and output have equal width. |
| XCOM_OP_ARGMAX_IO_DEPTH_NE |
argmax need input and output have equal depth. |
| XCOM_OP_ARGMAX_OC_NOT_UNIQ |
argmax need output channel is 1. |
| XCOM_OP_CONCAT_IO_CHANNEL_NE |
concat operator need input and output channel equal. |
| XCOM_OP_CORR_ELT_MUL_OUTPUT_ERROR |
correlation eltwise multiply output depth calculate error. |
| XCOM_OP_CORR_ELT_MUL_IO_HEIGHT_NE |
Correlation eltwise multiply need input height is equal to output height |
| XCOM_OP_CORR_ELT_MUL_IO_WIDTH_NE |
Correlation eltwise multiply need input width is equal to output width |
| XCOM_OP_CORR_ELT_MUL_IO_CHANNEL_NE |
Correlation eltwise multiply need input channel is equal to output channel |
| XCOM_OP_CORR_ELT_MUL_INPUT_CHANNEL_NE |
Correlation eltwise multiply need all input channel are equal |
| XCOM_OP_COST_STRIDE_OUTPUT_DEPTH_NE |
Cost operator need stride is equal to output depth |
| XCOM_OP_COST_IO_HEIGHT_NE |
Cost operator need input and output have same height |
| XCOM_OP_COST_IO_WIDTH_NE |
Cost operator need input and output have same width |
| XCOM_OP_COST_INPUT_DEPTH_NOT_UNIQ |
Cost operator need input depth = 1 |
| XCOM_OP_COST_IO_CHANNEL_NE |
Cost operator need input channel = 1/2 output channel |
| XCOM_OP_DOWNSAMPLE_IO_HEIGHT_NE |
downsample need input height ceiling divide scale height equal to output height |
| XCOM_OP_DOWNSAMPLE_IO_WIDTH_NE |
downsample need input width ceiling divide scale width equal to output width |
| XCOM_OP_DOWNSAMPLE_IO_CHANNEL_NE |
downsample need input and output channel equal. |
| XCOM_OP_TDPTCONV3D_ICG_NOT_ENOUGH |
Transposed depth conv 3d input channel group mult channel parallel is less than feature channel size. |
| XCOM_OP_TDPTCONV3D_KERNEL_HEIGHT_OVERFLOW |
Transposed depth conv 3d kernel height overflow. |
| XCOM_OP_TDPTCONV3D_KERNEL_WIDTH_OVERFLOW |
Transposed depthconv 3d kernel width overflow. |
| XCOM_OP_TDPTCONV3D_KERNEL_DEPTH_OVERFLOW |
Transposed depth conv 3d kernel depth overflow. |
| XCOM_OP_TDPTCONV3D_STRIDE_HEIGHT_OVERFLOW |
Transposed depth conv 3d stride height overflow. |
| XCOM_OP_TDPTCONV3D_STRIDE_WIDTH_OVERFLOW |
Transposed depth conv 3d stride width overflow. |
| XCOM_OP_TDPTCONV3D_STRIDE_DEPTH_OVERFLOW |
Transposed depth conv 3d stride depth overflow. |
| XCOM_OP_TDPTCONV3D_OCG_NOT_ENOUGH |
Transposed depth conv 3d output channel group mult channel parallel is less than feature channel size. |
| XCOM_OP_DPTCONV_IC_WEIGHT_DEPTH_NE |
depth conv need kernel mult input channel group equal to weight bank depth |
| XCOM_OP_DPTCONV3D_KERNEL_HEIGHT_OVERFLOW |
depth conv 3d kernel height overflow. |
| XCOM_OP_DPTCONV3D_KERNEL_WIDTH_OVERFLOW |
depth conv 3d kernel width overflow. |
| XCOM_OP_DPTCONV3D_KERNEL_DEPTH_OVERFLOW |
depth conv 3d kernel depth overflow. |
| XCOM_OP_DPTCONV3D_STRIDE_HEIGHT_OVERFLOW |
depth conv 3d stride height overflow. |
| XCOM_OP_DPTCONV3D_STRIDE_WIDTH_OVERFLOW |
depth conv 3d stride width overflow. |
| XCOM_OP_DPTCONV3D_STRIDE_DEPTH_OVERFLOW |
depth conv 3d stride depth overflow. |
| XCOM_OP_DPTCONV3D_OCG_NOT_ENOUGHT |
depth conv 3d output channel group mult channel parallel is less than feature channel size. |
| XCOM_OP_THRESHOLD_HEIGHT_NE |
Threshold operator needs input and output have same height. |
| XCOM_OP_THRESHOLD_WIDTH_NE |
Threshold operator needs input and output have same width. |
| XCOM_OP_THRESHOLD_CHANNEL_NE |
Threshold operator needs input and output have same channel. |
| XCOM_OP_TILE_HEIGHT_NE |
Tile operator needs input and output height have scale multiple relationship. |
| XCOM_OP_TILE_WIDTH_NE |
Tile operator needs input and output width have scale multiple relationship. |
| XCOM_OP_TILE_CHANNEL_NE |
Tile operator needs input and output channel have scale multiple relationship. |
| XCOM_OP_UPSAMPLE_HEIGHT_NE |
upsample operator needs input and output height have scale multiple relationship. |
| XCOM_OP_UPSAMPLE_WIDTH_NE |
upsample operator needs input and output width have scale multiple relationship. |
| XCOM_OP_UPSAMPLE_CHANNEL_NE |
upsample operator needs input and output channel have scale multiple relationship. |
| XCOM_OP_ELEW_IO_CHANNEL_NE |
element wise operator needs input and output channel equal |
| XCOM_OP_ELEW3D_IO_CHANNEL_NE |
element wise 3d operator needs input and output channel equal |
| XCOM_OP_MUL_IO_HEIGHT_NE |
mul operator needs input and output have same height. |
| XCOM_OP_MUL_IO_WIDTH_NE |
mul operator needs input and output have same width. |
| XCOM_OP_MUL_IO_DEPTH_NE |
mul operator needs input and output have same depth. |
| XCOM_OP_MUL_IO_CHANNEL_NE |
mul operator needs input and output have same height. |
| XCOM_OP_MVR_IO_HEIGHT_NE |
mvr operator needs input and output have same height. |
| XCOM_OP_MVR_IO_WIDTH_NE |
mvr operator needs input and output have same width. |
| XCOM_OP_MVR_IO_DEPTH_NE |
mvr operator needs input and output have same depth. |
| XCOM_OP_MVR_IO_CHANNEL_NE |
mvr operator needs input and output have same height. |
| XCOM_OP_CONV_KERNEL_WIDTH_OVERFLOW |
Kernel width is larger than input width plus padding. that makes window cannot slide |
| XCOM_OP_CONV_KERNEL_HEIGHT_OVERFLOW |
Kernel height is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_CONV_STRIDE_WIDTH_OVERFLOW |
Kernel width is larger than input width plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_CONV_STRIDE_HEIGHT_OVERFLOW |
Kernel height is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_CONV_KERNEL_DEPTH_OVERFLOW |
Kernel depth is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_TCONV3D_KERNEL_HEIGHT_OVERFLOW |
Kernel height is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_TCONV3D_STRIDE_WIDTH_OVERFLOW |
Kernel width is larger than input width plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_TCONV3D_STRIDE_HEIGHT_OVERFLOW |
Kernel height is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_TCONV3D_KERNEL_DEPTH_OVERFLOW |
Kernel depth is larger than input height plus padding. that makes window cannot slide, or, out of hardware limitation |
| XCOM_OP_TCONV3D_DILATION_HEIGHT_OVERFLOW |
Dilation height is too large for input height |
| XCOM_OP_TCONV3D_DILATION_WIDTH_OVERFLOW |
Dilation height is too large for input height |
| XCOM_OP_TCONV3D_DILATION_DEPTH_OVERFLOW |
Dilation height is too large for input height |
| XCOM_OP_TCONV3D_ICG_WEIGHT_DEPTH_OVERFLOW |
Input channel group stride overflows the weight bank depth. |
| XCOM_OP_CONV_DILATION_WIDTH_ALL_PAD |
Padding width too large for dilation. Make all value in slide window are padding without input. |
| XCOM_OP_CONV_DILATION_HEIGHT_ALL_PAD |
padding height too large for dilation, make all value in slide window are padding without input. |
| XCOM_OP_CONV_DILATION_DEPTH_ALL_PAD |
padding depth too large for dilation, make all value in slide window are padding without input. |
| XCOM_OP_CONV_STRIDE_OVERFLOW |
input channel stride overflow the weight bank depth. |
| XCOM_OP_TCONV3D_KENREL_DEPTH_OVERLARGE |
kernel depth too large covering all feature input and padding, that makes window cannot slide. Or, out f hardware limitation. |
| XCOM_OP_TCONV3D_KENREL_WIDTH_OVERLARGE |
kernel width too large covering all feature input and padding, that makes window cannot slide. Or, out f hardware limitation. |
| XCOM_OP_TCONV3D_KENREL_HEIGHT_OVERLARGE |
kernel height too large covering all feature input and padding, that makes window cannot slide. Or, out f hardware limitation. |
| XCOM_OP_TCONV3D_DILATION_WIDTH_ALL_PAD |
padding width too large for dilation, makes all value in slide window are padding without input feature. |
| XCOM_OP_TCONV3D_DILATION_HEIGHT_ALL_PAD |
padding height too large for dilation, makes all value in slide window are padding without input feature. |
| XCOM_OP_TCONV3D_DILATION_DEPTH_ALL_PAD |
padding depth too large for dilation, makes all value in slide window are padding without input feature. |
| XCOM_ACGEN_CONV_ERROR |
error parameters while generating convolution, like some convolution parameter exceed hardware limitation or unexpected middle result generated. |
| XCOM_BANK_CONV_ERROR |
error banking status or behavior for convolution operation wile generating assembly code. check conv op data flow and tensor aggregation. |
| XCOM_BANK_INVALID_ID |
invalid id while parsing for finding bank id. check bank name in target_factory. |
| XCOM_STR_PARSE_FAILED |
Failed to parse specific string, perhaps it's an illegal string or empty string. |
| XCOM_DATA_SEGMENT_FAULT |
data tensor or const tensor index exceed max tensor size, check index value. |
| XCOM_OP_CONFIG_MISSING |
Failed to get specific op config. check op type config file. |
| XCOM_AIE_TARGET_INIT_FAILED |
Failed to init aie target. |
| XCOM_AIE_SHIMTILE_OVERFLOW |
aie tiling shim index or shim size out of range. |
| XCOM_AIE_MEMTILE_OVERFLOW |
aie tiling memory index or memory size out of range. |
| XCOM_AIE_AIETILE_OVERFLOW |
aie tiling index or bd index out of range. |
| XCOM_AIE_OUT_OF_BD |
cannot find free bd for mem tiling. |
| XCOM_SLNODE_UNREGISTED |
slnode target, type, name, or any info unregistered. |
| XCOM_INVOKE_BASE |
An improper function invoking occurred! |
| XCOM_VALUE_UNMATCH |
The value is not supposed! |
| XCOM_MEANINGLESS_VALUE |
The value is meaningless. |
| XCOM_SIZE_UNMATCH |
The object's size is not matching the requirement. |
| XCOM_OPERATOR_UNSUPPORT |
This operator is not supposed! |
| XCOM_LEAF_SUBGRAPH_REQUIRED |
Here requires a leaf subgraph. |
| XCOM_UNACCEPTABLE_SUBGRAPH |
The subgraph is not allowed or meeting the requirements. |
| XCOM_PASS_MISS |
Some compiler pass is missed. |
| XCOM_PASS_DEPENDENCY |
Something wrong about pass dependency. |
| XCOM_DEBUGMANAGER_NOT_RECORDING |
Invalid status for DebugManager recording. |
| XCOM_NO_PASS_RECORDED |
No Pass has been recorded in DebugManager. |
| XCOM_DEBUGMANAGER_UNRECORDED_OP |
Unrecorded op found. |
| XCOM_DDR_ADDR_ASSIGNMENT_FAILED |
DDR address assignment is failed. |
| XCOM_DDR_PARAM_SPACE_INITIALIZTION_SIZE_ERROR |
DDR parameter space initialization size error. Please contact us. |
| XCOM_UNIMPLEMENT |
This part of function is unimplemented. |
| XCOM_UNDEFINED_STATE |
This behavior is undefined. |
| XCOM_EXECUTE_SYSTEM_CMD_FAILED |
Error occurred when execute the system command. |
| XCOM_TENSOR_DIMENSION_UNMATCH |
The tensor dimension is unexpected. |
| XCOM_DATA_OUTRANGE |
Data value is out of range! |
| XCOM_TYPE_UNMATCH |
Unmatched type! |
| XCOM_ITEM_UNDEFINED |
The requested item was not found or defined! |
| XCOM_OPERATION_FAILED |
The supposed operation is failed! |
| XCOM_DIR_OPEN_FILE_FAILED |
The file can't be read or can't access it. |
| XCOM_INVALID_GRAPH |
Subgraph is null or error subgraph type like cpu subgraph using for dpu |
| XCOM_UNREGISTED_STRATEGY |
This error code only used in dead code |
| XCOM_INVALID_ARCH_PARAM |
This error code only used in dead code |
| XCOM_ACGEN_ERROR |
Instruction generating fail, contact us. |
| XCOM_UNEXPECTED_VALUE |
Inappropriate value at this place like nullptr or non-one value |
| XCOM_UNEXPECTED_ARCH |
Unknown architecture name, check target_factory |
| XCOM_ARCH_UNREGISTED |
Unknown architecture name, check target_factory |
| XCOM_ARCH_INVALID_NAME |
Failed to file arch name in config dict, target factory or arch name serialization, check arch name. |
| XCOM_FILE_NOT_EXISTS |
The file is not exists |
| XCOM_TARGET_REQUIRED |
The compiler requires the target. |
| XCOM_GRAPH_REQUIRED |
The compiler requires an input graph. |
| XCOM_LOGICAL_CONDITION_ERROR |
The logical condition is wrong. |
| XCOM_INVALID_SUPERLAYER |
The superlayer subgraph is invalid. |
| XCOM_UNSUPPORT_QUANTIZATION |
The fix info is error or unsupported. |
| XCOM_SWIM_NODE_TYPE_ERROR |
mismatch slnode type |
| XCOM_SWIM_OUTPUT_MISSING |
swim lane output bank smf missing. |
| XCOM_SWIM_UNDEFINED_TYPE |
undefined swim program or lane type. |
| XCOM_ALLOCATE_BANK_FAIL |
XCompiler occurs error when allocating bank. Please contact us. |
| XCOM_TILING_FAIL |
XCompiler occurs error when tiling. Please contact us. |
| XCOM_PM_FAIL |
The compiler occurs an error when generating instructions, contact us. |
| XCOM_SUBGRAPH_ATTR_MISSING |
The subgraph attribute is missing. |
| XCOM_ASSIGN_OUTPUT_OPS_FAILED |
Assign output ops failed. |
| XCOM_DDR_REG_ID_SIZE_UNMATCH |
The DDR reg id size unmatch. Please contact us. |
| XCOM_DDR_OPTIMIZATION_0_FAILED |
DDR assignment optimization failed (code 0). Please contact us. |
| XCOM_DDR_OPTIMIZATION_1_FAILED |
DDR assignment optimization failed (code 1). Please contact us. |
| XCOM_TRANSPOSED_CONV_WEIGHTS_DDR_OPTIMIZATION_ERROR |
DDR assignment optimization failed during optimizing the transposed convolution's weights. Please contact us. |
| XCOM_DIRECTORY_EXIST |
The directory is existing, can't be created multiple times. |
| XCOM_DIRECTORY_NOT_EXIST |
The directory is not existing. |
| XCOM_INVALID_COMPILE_MODE |
The compile mode is not supported now. |
| XCOM_INVALID_TARGET |
Invalid DPU target |
| XCOM_DPU_MEMORY_ALLOCATION_FAILED |
error mapping smfs onto dpu banks since error input group of smfs like no specific type (data, const data (weights, bias ...)) found in given Smf group. Or unaligned smf info on data width, height or their stride, channel and channel group stride. Unaligned smfs cannot be aggregated on aggregation dimension. |
| XCOM_UNSUPPORT_NONLIEAR_TYPE |
The nonlinear type is unsupported by DPU. |
| XCOM_PAD_KERNEL_SIZE_UNMATCH |
The pad size is not correct comparing with the kernel size. |
| XCOM_DATA_DEPENDCY_MISSING |
Generate code failed. |
| XCOM_MULTIPLE_WEIGHTS |
There are more than one weights for some ops. |
| XCOM_MULTIPLE_BIAS |
There are more than one bias for some ops. |
| XCOM_MULTIPLE_PRELU |
There are more than oen prelu for some ops. |
| XCOM_TOO_MANY_INPUTS |
There are too many inputs for the op. |
| XCOM_TENSOR_SHAPE_UNMATCH |
Tensor shapes for some ops are not matching. |
| XCOM_UNSUPPORT_KERNEL_SIZE |
The op's kernel size is not supported. |
| XCOM_CODE_GEN_ERROR |
Code generation fail. |
| XCOM_UNSUPPORT_ROUND_MODE |
The round mode is not supported. |
| XCOM_ADDITION_OVERFLOW |
The addition is overflow. |
| XCOM_INT_COMPOSITION_INVALID_RANGE |
The integer composition's output range constraint is invalid. Please contact us. |
| XCOM_TO_XINT_DATA_SIZE_UNMATCH |
The input data vector's size is unmatching with the xint's bit width |
| XCOM_REVERT_XINT_DATA_SIZE_UNMATCH |
The input data vector's size is unmatching with the xint's original bit width. |
| XCOM_DWCONV_PARAM_REORDER_SIZE_UNMATCH |
size unmatching occurred during reordering the DepthwiseConv2d's parameter. |
| XCOM_CONV_PARAM_REORDER_SIZE_UNMATCH |
size unmatching occured during reordering the Conv2d's parameter. |
| XCOM_AIE_CORE_NUM_MISMATCH |
The config of aie core number mismatchs. |
| XCOM_AIE_TIMING_CONFIG_MISMATCH |
The config inside aie timing calculating mismatchs. |
| XCOM_AIE_TILING_FAIL |
There is not enough bank space inside AIE local memory for this tensor |
| XCOM_AIE_UNSUPPORTED_OP |
Unsupported op for aie tiling |
| XCOM_PARTITIONENGINE_HINTS_ERROR |
The partition engine's hints are invalid. Please contact us. |
| XCOM_PARSE_FAIL |
Failed to parse structured data! |
| XCOM_PARTITION_REPEATED_REGISTRATION |
Repeated checker registration for the op_type and arch_type in partition. |
| XCOM_UNREGISTED_SLNODE |
Unregisted Slnode |
| XCOM_GET_CHANNEL_FAILED |
xGet channel failed. |
| XCOM_GET_PACKET_ID_FAILED |
xGet packet id failed. |
| XCOM_GET_PACKET_TYPE_FAILED |
xGet packet type failed. |
| XCOM_GET_LOCK_ID_FAILED |
xGet lock id failed. |
| XCOM_GET_BD_FAILED |
xGet bd failed. |
| XCOM_SMF_SPEC_MISSING |
no found such spec for the smf |
| XCOM_SMF_MISSING |
no found such smf |
| XCOM_SMF_Y_SIZE_ERROR |
smf y direction size overflow bank height with padding. |
| XCOM_SMF_C_SIZE_ERROR |
channel direction smf need height = 1, width = 1, pad top and bottom = 0. |
| XCOM_SMF_COORDINATE_ERROR |
smf on coordinate have error size or missing. |
| XCOM_SMF_CONCAT_ERROR |
smf on concatenate have error size or missing. |
| XCOM_SMF_BIAS_ERROR |
bias smf size error or missing. |
| XCOM_SMF_PARAM_ERROR |
param smf size error or missing. |
| XCOM_SMF_TYPE_ERROR |
error smf type. |
| XCOM_SMF_TENSOR_TYPE_ERROR |
tensor type error while smf arrangment |
| XCOM_SMF_RESERVED_ERROR |
smf dynamic size error or missing or addressing failed. |
| XCOM_SMF_BANK_MANAGEMENT_ERROR |
error happens in bank management, error name addressing or missing. |
| XCOM_BANK_SMF_EXIST |
smf name already exists in bank. |
| XCOM_BANK_ADDR_MISSING |
bank addressing missing. |
| XCOM_BANK_ADDR_OVERFLOW |
bank addressing overflow. |
| XCOM_BANK_ADDR_ERROR |
bank block addr have error sequence or non-exist addressing. |
| XCOM_USER_FILE_NOT_EXISTS |
The file does not exist |
| XCOM_USER_FILE_OPERATION_ERR |
The file operation failed |
| XCOM_USER_INVALID_COMPILE_MODE |
The compile mode is not supported now. |
| XCOM_USER_DIRECTORY_NOT_EXIST |
The directory does not exist, create it first. |
| XCOM_USER_DIRECTORY_ALREADY_EXIST |
The directory already exist, remove it first. |
| XCOM_USER_INVALID_CMD_PARAM |
Invalid cmdline parameter |
| XCOM_USER_INVALID_TARGET |
Invalid DPU target is given by cmdline. |
| XCOM_USER_INVALID_OUTPUT_OPS |
The output ops user specified can't be found in the network. Please check the op names. |
| XCOM_USER_INVALID_OUTPUT_TENSORS |
The output tensors user specified can't be found in the network. Please check the tensor names. |
| XCOM_USER_UNSUPPORTED_SYSTEM |
The function is not supported by current operating system. |
| XCOM_PASS_DEPENDENCY_ERROR |
Something wrong about pass dependency. |
| XCOM_PASS_UNREGISTERED |
Pass has not been registered. |
| XCOM_PASS_NULL_POINTER |
Accessing of uninitialized object or pointer |
| XCOM_PASS_TARGET_UNIMPLEMENTED |
The target has not been implemented yet. |
| XCOM_PASS_GRAPH_ATTR_MISSING |
Necessary attribution has not been set for the graph. |
| XCOM_PASS_OP_INVALID_ATTR |
The parameter of the operator is invalid. Please check the input network. |
| XCOM_PASS_OP_ATTR_MISMATCH |
The parameter of the operator is unexpected. |
| XCOM_PASS_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_PASS_OP_ATTR_MISSING |
The requisite parameter is missing. Please check input network. |
| XCOM_PASS_TENSOR_SIZE_ERROR |
Size of the tensor is invalid. Please check input network. |
| XCOM_PASS_TENSOR_SIZE_MISMATCH |
Size mismatch between correlative tensors. |
| XCOM_PASS_TENSOR_DIMS_MISMATCH |
Dimensions of the tensor is unexpected. |
| XCOM_COMGRAPH_OP_MISSING |
The op is missing in specific graph. |
| XCOM_COMGRAPH_OP_CONNECTION_MISSING |
The connection is missing in the graph. |
| XCOM_COMGRAPH_OP_CONNECTION_INVALID |
The connection between two specific op is unexpected. Check input network. |
| XCOM_COMGRAPH_ATTR_NOT_ASSIGNED |
The requisite attribution of xcomgraph has not be assigned. |
| XCOM_COMGRAPH_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_COMGRAPH_SUBGRAPH_MISSING |
The subgraph is missing. |
| XCOM_COMGRAPH_BANK_UNEXPECTED_STATE |
Bank assignment is rejected by a particular subgraph. |
| XCOM_COMGRAPH_BANK_INFO_MISMATCH |
Bank requirement mismatch between 2 ops. |
| XCOM_FRONTEND_SUBGRAPH_MISSING |
The subgraph is missing. |
| XCOM_FRONTEND_NULL_POINTER |
Accessing of uninitialized object or pointer |
| XCOM_FRONTEND_UNEXPECTED_STATE |
A impossible state occurs. There might be a logical error of programming. |
| XCOM_FRONTEND_GRAPH_OP_MISSING |
The op is missing in specific graph. |
| XCOM_FRONTEND_GRAPH_TEMPLATE_MISMATCH |
Pattern mismatch between template and replacing process. |
| XCOM_FRONTEND_GRAPH_LEVEL_MISMATCH |
A unsuitable level of graph is given for current function. |
| XCOM_FRONTEND_GRAPH_ATTR_MISSING |
Necessary attribution has not been set for the graph. |
| XCOM_FRONTEND_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_FRONTEND_OP_INVALID_ATTR |
The parameter of the operator is invalid. Please check the input network. |
| XCOM_FRONTEND_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_FRONTEND_OP_UNSUPPORTED_BLOB_NUMBER |
Blob number of the operator is unsupported by target DPU. |
| XCOM_FRONTEND_OP_UNSUPPORTED_ATTR |
An attribution of the operator is unsupported by target DPU. |
| XCOM_FRONTEND_OP_UNSUPPORTED_MODE |
The mode has not been implemented for specific operator. |
| XCOM_FRONTEND_OP_UNSUPPORTED_NONLIEAR |
The nonlinear(or activation) is unsupported by target DPU |
| XCOM_FRONTEND_OP_UNSUPPORTED |
The operator has not been implemented by target DPU. |
| XCOM_FRONTEND_OP_ATTR_MISMATCH |
The parameter of the operator is unexpected. |
| XCOM_FRONTEND_QUANT_ATTR_MISSING |
Quantizing information for the op is mission |
| XCOM_FRONTEND_QUANT_ATTR_OUT_OF_RANGE |
The shiftbit for quantizing is out of range, that the range is restricted by target DPU. |
| XCOM_FRONTEND_TENSOR_DIMS_MISMATCH |
Dimensions of the tensor is unexpected. |
| XCOM_FRONTEND_TENSOR_SHAPE_MISMATCH |
Shape mismatch between 2 correlative tensors. |
| XCOM_FRONTEND_TENSOR_SIZE_MISMATCH |
Size mismatch between 2 correlative tensors. |
| XCOM_FRONTEND_DATA_TYPE_MISMATCH |
Data type mismatch between 2 correlative tensors. |
| XCOM_FRONTEND_BITWIDTH_MISMATCH |
The bit width of the tensor is unexpected. |
| XCOM_GENINST_NULL_POINTER |
Accessing of uninitialized object or pointer |
| XCOM_GENINST_INVALID_VALUE |
A invalid value is given for specific function. |
| XCOM_GENINST_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_GENINST_OP_UNSUPPORTED |
The operator has not been implemented by target dpu. |
| XCOM_GENINST_OP_UNSUPPORTED_MODE |
The mode has not been implemented for specific operator. |
| XCOM_GENINST_OP_UNSUPPORTED_NONLIEAR |
The nonlinear(or activation) is unsupported by target DPU |
| XCOM_GENINST_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_GENINST_TARGET_UNIMPLEMENTED |
The target has not been implemented yet. |
| XCOM_GENINST_TARGET_BANK_ERR |
No output bank associated with current op within target DPU. |
| XCOM_GENINST_GRAPH_TEMPLATE_MISMATCH |
Pattern mismatch between template and replacing process. |
| XCOM_GENINST_BANK_INFO_MISMATCH |
Bank requirement mismatch between 2 ops. |
| XCOM_GENINST_TILING_FAIL |
Failed to get a available tiling scheme. |
| XCOM_GENINST_CODE_GEN_ERROR |
Code generation fail. |
| XCOM_OPFACTORY_ILLEGAL_NAME |
The object name is illegal. |
| XCOM_OPFACTORY_UNEXPECTED_STATE |
A impossible state occurs. There might be a logical error of programming. |
| XCOM_OPFACTORY_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_OPFACTORY_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_OPFACTORY_OP_UNSUPPORTED_BLOB_NUMBER |
Blob number of the operator is unsupported by target DPU. |
| XCOM_OPFACTORY_OP_UNSUPPORTED_MODE |
The mode has not been implemented for specific operator. |
| XCOM_OPFACTORY_OP_UNSUPPORTED_NONLIEAR_TYPE |
The nonlinear(or activation) is unsupported by target DPU |
| XCOM_OPFACTORY_OP_UNSUPPORTED |
The operator has not been implemented by target DPU. |
| XCOM_OPTIMIZE_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_OPTIMIZE_GRAPH_OPERATION_FAILED |
A graphic problem has caused by graphic operation. |
| XCOM_OPTIMIZE_OP_UNSUPPORTED_ATTR |
An attribution of the operator is unsupported by target DPU. |
| XCOM_OPTIMIZE_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_OPTIMIZE_TENSOR_SHAPE_INVALID |
Tensor shape is invalid. Please check the input network. |
| XCOM_OPTIMIZE_TARGET_BANK_ERR |
No output bank associated with current op within target DPU. |
| XCOM_OPTIMIZE_OP_ATTR_MISMATCH |
The parameter of the operator is unexpected. |
| XCOM_UTIL_NULL_POINTER |
Accessing of uninitialized object or pointer |
| XCOM_UTIL_OPERATION_DENIED |
The operation is not permitted. |
| XCOM_UTIL_PARSE_FAIL |
Failed to parse structured data. |
| XCOM_UTIL_OP_UNSUPPORTED_NONLIEAR_TYPE |
The nonlinear(or activation) is unsupported by target DPU |
| XCOM_UTIL_OP_UNSUPPORTED |
The operator has not been implemented by target DPU. |
| XCOM_UTIL_TENSOR_DIMS_MISMATCH |
Dimensions of the tensor is unexpected. |
| XCOM_UTIL_TENSOR_SHAPE_INVALID |
Tensor shape is invalid. Please check the input network. |
| XCOM_UTIL_DATA_TYPE_INVALID |
Data type is invalid for current context. |
| XCOM_UTIL_ATTR_OUT_OF_RANGE |
The value is out of range. |
| XCOM_UTIL_INVALID_VALUE |
A invalid value is given for specific function. |
| XCOM_UTIL_INVALID_VALUE_RANGE |
The data range is illegal. |
| XCOM_UTIL_ADDITION_OVERFLOW |
The addition is overflow. |
| XCOM_UTIL_DATA_SIZE_MISMATCH |
Size mismatch between 2 data chunk. |
| XCOM_UTIL_BANK_ALLOC_FAILED |
Failed to get a available scheme of bank assignment. |
| XCOM_BANKASSIGN_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_BANKASSIGN_INVALID_ITEM |
The item is not available yet. |
| XCOM_BANKASSIGN_OUT_OF_BANK_SIZE |
Insufficiency of bank size, input model might be too large. |
| XCOM_BANKASSIGN_TARGET_ENGINE_UNREGISTERED |
The engine is not registered for dpu target. |
| XCOM_BANKASSIGN_INVALID_VALUE |
A invalid value is given for specific function. |
| XCOM_BANKASSIGN_TARGET_BANK_ERR |
No output bank associated with current op within target DPU. |
| XCOM_BANKASSIGN_BANK_UNEXPECTED_STATE |
Bank space manager might be in disorder. |
| XCOM_BANKASSIGN_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_BANKASSIGN_BANK_INFO_MISMATCH |
Bank requirement mismatch between 2 ops. |
| XCOM_PARTITION_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_PARTITION_NULL_POINTER |
Accessing of uninitialized object or pointer |
| XCOM_DDRALLOC_NULL_POINTER |
Accessing of uninitialized object or pointer. |
| XCOM_DDRALLOC_UNEXPECTED_STATE |
A impossible state occurs. There might be a logical error of programming. |
| XCOM_DDRALLOC_INVALID_ITEM |
Failed to get a available scheme of bank assignment. |
| XCOM_DDRALLOC_ITEM_UNDEFINED |
The item has not be defined. |
| XCOM_DDRALLOC_DATA_SIZE_MISMATCH |
Size mismatch between 2 data chunk. |
| XCOM_DDRALLOC_MEM_ACCESS_OVERFLOW |
Memory access overflow. |
| XCOM_DDRALLOC_OUT_OF_MEM |
DDR space is not enough for current model. |
| XCOM_DDRALLOC_FEATURE_UNIMPLEMENT |
The feature of DDR allocating optimization is not implemented. |
| XCOM_DDRALLOC_OPERATION_DENIED |
The operation is not permitted. |
| XCOM_DDRALLOC_TARGET_UNIMPLEMENTED |
The target has not been implemented yet. |
| XCOM_DDRALLOC_ASSIGNMENT_STATE_ERROR |
The state of DDR allocation is unexpected. |
| XCOM_DDRALLOC_PARAM_SPACE_INITIALIZTION_SIZE_ERROR |
DDR parameter space initialization size error. Please contact us. |
| XCOM_DDRALLOC_GRAPH_LEVEL_MISMATCH |
A unsuitable level of graph is given for current function. |
| XCOM_DDRALLOC_GRAPH_OP_MISSING |
The op is missing in specific graph. |
| XCOM_DDRALLOC_GRAPH_INVALID_STRUCTURE |
There is a unexpected pattern in the graph. Please check the input network. |
| XCOM_DDRALLOC_OP_UNSUPPORTED |
The operator has not been implemented by target DPU. |
| XCOM_DDRALLOC_OP_UNSUPPORTED_MODE |
The mode has not been implemented for specific operator. |
| XCOM_DDRALLOC_OP_INVALID_BLOB_NUMBER |
Blob number of the operator is invalid. Please check the input network. |
| XCOM_DDRALLOC_OP_UNSUPPORTED_NONLIEAR_TYPE |
The nonlinear(or activation) is unsupported by target DPU |
| XCOM_DDRALLOC_TENSOR_DIMS_MISMATCH |
Dimensions of the tensor is unexpected. |
| XCOM_DDRALLOC_TENSOR_SHAPE_MISMATCH |
Shape mismatch between 2 correlative tensors. |
| XCOM_DDRALLOC_TENSOR_SIZE_ERROR |
Size of the tensor is invalid. Please check input network. |
| XCOM_DDRALLOC_TENSOR_SIZE_MISMATCH |
Size mismatch between 2 correlative tensors. |
| VAILIB_DPU_TASK_NOT_FIND |
Model files not find |
| VAILIB_DPU_TASK_OPEN_ERROR |
Open file failed |
| VAILIB_DPU_TASK_CONFIG_PARSE_ERROR |
Parse model config file failed |
| VAILIB_DPU_TASK_TENSORS_EMPTY |
Runner has no input tensors |
| VAILIB_DPU_TASK_SUBGRAPHS_EMPTY |
Runner has no subgraphs |
| VAILIB_CPU_RUNNER_OPEN_LIB_ERROR |
dlopen can not open lib |
| VAILIB_CPU_RUNNER_LOAD_LIB_SYM_ERROR |
dlsym load symbol error |
| VAILIB_CPU_RUNNER_TENSOR_BUFFER_NOT_FIND |
Can not find tensor buffer with this name |
| VAILIB_CPU_RUNNER_TENSOR_BUFFER_NOT_CONTINOUS |
Tensor buffer not continuous |
| VAILIB_CPU_RUNNER_READ_FILE_ERROR |
Fail to read file |
| VAILIB_CPU_RUNNER_WRITE_FILE_ERROR |
Fail to write file |
| VAILIB_CPU_RUNNER_CPU_OP_NOT_FIND |
Can not find op with this name |
| VAILIB_GRAPH_RUNNER_NOT_FIND |
GraphTask can not find tensor or tensor buffer |
| VAILIB_GRAPH_RUNNER_DPU_BATCH_ERROR |
GraphTask get dpu batch not equal |
| VAILIB_GRAPH_RUNNER_NOT_SUPPORT |
The function or value are not supported in graph runner |
| VAILIB_GRAPH_RUNNER_NOT_OVERRIDE |
The function has not been overridden |
| VAILIB_MATH_NOT_SUPPORT |
The function or value are not supported in vai-math |
| VAILIB_MATH_FIX_POS_ERROR |
Softmax table not support the fix position value |
| VAILIB_MODEL_CONFIG_NOT_FIND |
Model config info not find |
| VAILIB_MODEL_CONFIG_OPEN_ERROR |
Model config file or directory open error |
| VAILIB_MODEL_CONFIG_CONFIG_PARSE_ERROR |
Model config file parse error |
| VAILIB_BENCHMARK_LIST_EMPTY |
Can not found images. List of images are empty |
| VAILIB_DEMO_CANVAS_ERROR |
Canvas image size is too small |
| VAILIB_DEMO_GST_ERROR |
Failed to open gstreamer |
| VAILIB_DEMO_IMAGE_LOAD_ERROR |
Failed to load image |
| VAILIB_DEMO_OUT_OF_BOUNDARY |
Gui rects out of boundary |
| VAILIB_DEMO_VIDEO_OPEN_ERROR |
Cannot open video stream |
| VART_OPEN_DEVICE_FAIL |
Cannot open device |
| VART_LOAD_XCLBIN_FAIL |
Bitstream download failed |
| VART_LOCK_DEVICE_FAIL |
Cannot lock device |
| VART_FUNC_NOT_SUPPORT |
Function not support |
| VART_XMODEL_ERROR |
XMODEL error |
| VART_GRAPH_ERROR |
Graph error |
| VART_TENSOR_INFO_ERROR |
Tensor info error |
| VART_DPU_INFO_ERROR |
DPU info error |
| VART_SYSTEM_ERROR |
File system error |
| VART_DEVICE_BUSY |
Device busy |
| VART_DEVICE_MISMATCH |
Device mismatch |
| VART_DPU_ALLOC_ERROR |
DPU allocate error |
| VART_VERSION_MISMATCH |
Version mismatch |
| VART_OUT_OF_RANGE |
Array index out of range |
| VART_SIZE_MISMATCH |
Array size not match |
| VART_NULL_PTR |
Nullptr |
| VART_XRT_NULL_PTR |
Nullptr |
| VART_XRT_DEVICE_BUSY |
Device busy |
| VART_XRT_READ_ERROR |
Read error |
| VART_XRT_READ_CU_ERROR |
Read cu fatal |
| VART_XRT_FUNC_FAULT |
XRT function fault |
| VART_XRT_DEVICE_AVAILABLE_ERROR |
No devices available |
| VART_XRT_CU_AVAILABLE_ERROR |
No CU available |
| VART_XRT_OPEN_CONTEXT_ERROR |
xclOpenContext failed |
| VART_XRM_CREATE_CONTEXT_ERROR |
failed to create XRM context |
| VART_XRM_CONNECT_ERROR |
Failed to connect to XRM |
| VART_XRM_ACQUIRE_CU_ERROR |
Could not acquire CU |
| VART_DEVICE_BUFFER_ALLOC_ERROR |
Cannot alloc device buffer -- unknown datatype |
| VART_XCLBIN_READ_ERROR |
Failed to open xclbin file for reading |
| VART_XCLBIN_DOWNLOAD_ERROR |
Bitstream download failed ! |
| VART_CONTROLLER_VIR_MEMORY_ALLOC_ERROR |
not enough virtual space on host |
| VART_VERSION_MISMATCH_ERROR |
subgraph's version is mismatch with xclbin |
| VART_CONTROLLER_DUMP_FOLDER_CREATE_ERROR |
Create dump folder error |
| VART_CONTROLLER_DUMP_SUBFOLDER_CREATE_ERROR |
Create sub dump folder error |
| VART_DEVICE_MEMORY_ALLOC_ERROR |
Device memory not enough, alloc fail |
| VART_TENSOR_BUFFER_CREATE_ERROR |
TensorBuffer create fail |
| VART_TENSOR_BUFFER_INVALID |
invalid tensorbuffer input or output |
| VART_DPU_EXEC_ERROR |
DPU run fail |
| VART_DPU_TIMEOUT_ERROR |
DPU timeout |
| VART_CONTROLLER_DUMP_ERROR |
dump failed |
| VART_XCLBIN_PATH_INVALID |
xclbinPath is not set, consider setting XLNX_VART_FIRMWARE. |
| VART_GRAPH_FINGERPRINT_ERROR |
no hardware info in subgraph |
| VART_TENSOR_BUFFER_CHECK_ERROR |
TensorBuffer size less than offset, input shape invalid |
| VART_TENSOR_BUFFER_DIMS_ERROR |
input dims shape is invalid |
| XIR_ACCESS_ADDRESS_OVERFLOW |
The address you try to access does not exsit! |
| XIR_ADD_OP_FAIL |
Failed to add an op! |
| XIR_FILE_NOT_EXIST |
File doesn’t exist! |
| XIR_INTERNAL_ERROR |
it is an internal bug supposed never happen |
| XIR_INVALID_ARG_OCCUR |
Invalid arg occurrence! |
| XIR_INVALID_ATTR_DEF |
Invalid attribute definition! |
| XIR_INVALID_ATTR_OCCUR |
Invalid attr occurrence! |
| XIR_INVALID_DATA_TYPE |
The data type is invalid. |
| XIR_MEANINGLESS_VALUE |
The value you set for this parameter makes no sense. |
| XIR_MULTI_DEFINED_OP |
Multiple definition of OP! |
| XIR_MULTI_DEFINED_TENSOR |
Multiple definition of Tensor! |
| XIR_MULTI_REGISTERED_ARG |
Multiple registration of argument! |
| XIR_MULTI_REGISTERED_ATTR |
Multiple registration of attribute! |
| XIR_MULTI_REGISTERED_EXPANDED_ATTR |
Multiple registration of static attr! |
| XIR_MULTI_REGISTERED_OP |
Multiple registration of operator! |
| XIR_OPERATION_FAILED |
Fail to execute command! |
| XIR_OP_DEF_SHAPE_HINT_MISSING |
A shape hint is required by the op definition |
| XIR_OP_NAME_CONFLICT |
There are at least two ops assigned the same name, check the ops' name. |
| XIR_OUT_OF_RANGE |
idx out of range! |
| XIR_PROTECTED_MEMORY |
The content in protected momory for tensor can not be modified! |
| XIR_READ_PB_FAILURE |
failed to read pb file |
| XIR_REMOVE_OP_FAIL |
Failed to remove an op! |
| XIR_SHAPE_UNMATCH |
The shape is unmatching. |
| XIR_SUBGRAPH_ALREADY_CREATED_ROOT |
Already created root subgraph for the graph! |
| XIR_SUBGRAPH_CREATE_CHILDREN_FOR_NONLEAF |
|
| XIR_SUBGRAPH_HAS_CYCLE |
Children from a same subgraph depend each other! |
| XIR_SUBGRAPH_INVALID_MERGE_REQUEST_NONCHILD |
Cannot merge subgraphs which are not children! |
| XIR_SUBGRAPH_INVALID_MERGE_REQUEST_NONLEAF |
Cannot merge subgraphs which are not leaves! |
| XIR_UNDEFINED_ATTR |
Undefined attribute! |
| XIR_UNDEFINED_INPUT_ARG |
Undefined input arg! |
| XIR_UNDEFINED_OP |
Access undefined OP! |
| XIR_UNEQUIVALENT_ATTRIBUTE |
These two attributes/parameters are not equivalent. |
| XIR_UNEXPECTED_VALUE |
Unexpected value! |
| XIR_UNKNOWNTYPE_TENSOR |
The datatype of this tensor is not specified. |
| XIR_UNREGISTERED_ARG |
Unregistered argument! |
| XIR_UNREGISTERED_ATTR |
Unregistered attribute! |
| XIR_UNREGISTERED_OP |
Unregistered operator! |
| XIR_UNSUPPORTED_ROUND_MODE |
unsupported round mode. |
| XIR_UNSUPPORTED_TYPE |
unsupported data type for attr value |
| XIR_VALUE_UNMATCH |
Value unmatch! |
| XIR_WRITE_PB_FAILURE |
failed to write pb file |
| XIR_XIR_UNDEFINED_OPERATION |
Undefined operation! |
| TARGET_EXPLORER_XCLBIN_ERROR |
No xclbin specified |
| TARGET_EXPLORER_XCLBIN_ENV_ERROR |
DPU xclbin path specified by ‘XLNX_VART_FIRMWARE’ not exist, check! |
| TARGET_EXPLORER_XCLBIN_ENV_VAL_ERROR |
‘XLNX_VART_FIRMWARE’ need to be specified like /path/to/xxx.xclbin, check! |
| TARGET_EXPLORER_SYS_DEVICE_CHECK_ERROR |
The system has no device |
| TARGET_EXPLORER_XCLBIN_SET_ERROR |
xclbinPath is not set, consider setting XLNX_VART_FIRMWARE. |
| TARGET_EXPLORER_NO_DPU_ERROR |
xclbin is not for DPU, can't find DPU kernel in xclbin |
| TARGET_EXPLORER_BATCH_ERROR |
Only support multiple DPU cores with same batch and fingerprint |
| TARGET_EXPLORER_DEVICE_CHECK_ERROR |
No device available for current xclbin |
| TARGET_FACTORY_INVALID_ARCH |
Invalid target arch! |
| TARGET_FACTORY_INVALID_FEATURE_CODE |
Invalid target feature code! |
| TARGET_FACTORY_INVALID_ISA_VERSION |
Invalid target ISA version! |
| TARGET_FACTORY_INVALID_TYPE |
Invalid target type! |
| TARGET_FACTORY_MULTI_REGISTERED_TARGET |
Multiple registration of target! |
| TARGET_FACTORY_PARSE_TARGET_FAIL |
Fail to parse target from prototxt! |
| TARGET_FACTORY_UNREGISTERED_TARGET |
Unregistered target! |