Project-Based Simulation Flow Using Vivado Simulator - 1.0 English

Versal Adaptive SoC Soft DDR4 SDRAM Memory Controller LogiCORE IP Product Guide (PG353)
Document ID
PG353
Release Date
2023-10-18
Version
1.0 English
  1. In the Open IP Example Design Vivado project, under Flow Navigator, select Simulation Settings.
  2. Select Target simulator as Vivado Simulator.

    Under the Simulation tab, set the xsim.simulate.runtime to 1 ms (there are simulation RTL directives which stop the simulation after certain period of time, which is less than 1 ms) as shown in the following figure. The Generate Scripts Only option generates simulation scripts only. To run behavioral simulation, Generate Scripts Only option must be de-selected.

  3. Set the Simulation Language to Mixed.
  4. Apply the settings and select OK.

  5. In the Flow Navigator window, select Run Simulation and select Run Behavioral Simulation option as shown:

  6. Vivado invokes Vivado simulator and simulations are run in the Vivado simulator tool. For more information, see the Vivado Design Suite User Guide: Logic Simulation (UG900).